Top 10 Interesting Modern Mass Production and Manufacturing Technologies From Korea This Year
"Amazing Oyster Mass Production Process. Huge Scale Korea Oyster Farming" At 5 a.m., we move to the oyster farm in the sea of Tongyeong, South Korea. The oyster harvesting work platform is connected to the boat.
The net to hold the oysters is installed. The oyster farming line in the seawater is pulled up. The foreign substances on the oysters are washed away using a cleaner. Today, we plan to harvest 40 tons of oysters. Around 10 AM, we return to land with the harvested oysters. We evenly load the oysters in the net onto the large workbench.
40 workers separate the oyster shells. The workers' hands are very fast! The oyster shells that are thrown under the workbench are discharged outside through the rail. Oyster shells are crushed and recycled in various ways. Oysters are separated from the shells and packaged into small portions.
Oysters are washed again in clean water. This was an fresh and easy-to-consume Korean oyster production process :) "Huge Number of Bees! Honey Mass Production Process by Korean Beekeeping Farm" This is an apiary located in the mountains of Namyangju-si, South Korea It is a natural farm that only collects 100% natural honey. First, the dried mugwort is set on fire to create smoke. Make the bees fly away from the hive with a non-toxic mugwort scent. Move the hive to a sealed storage container. Remove the wax from the hive with a hot knife.
Put the honeycomb board with the wax removed into the honey extractor. The principle is to use centrifugal force to make the honey fall from the hive board. Filter out the foreign matter once more and put the honey in the container. Finally, filter out the foreign matter once more using a clean cloth. "Metal Roof Manufacturing Process. Steel Roof Mass Production Factory Automation in Korea"
Inject the galvanized iron plate (Spanish iron plate) into the roller. Attach the sponge foam to the hot iron plate. Sponge foam prevents corrosion and moisture from the sheet metal Forming the sheet metal with a rolling roller. Creating the curves by pressing. Forming the small ridge tile with a rolling roller. A wonderful house was completed using this sheet metal roof.
"Amazing Korean Road Construction Process. New Asphalt Driveway Machinery Technology" First, clean debris and surface on the road. Spray asphalt adhesive on the read. A truck carrying asphalt concrete material has arrived. Transfer asphalt concrete to the asphalt finisher. Adjust the paving interval to fit the road width.
Many workers move at the same time to clean the road neatly. Using hot oil from the roller to press the road flat. Safe and clean asphalt road is completed :) "Amazing Process of Moving House With Ladder Truck in Korea. High-Rise Apartment Moving Skill" Preparing an electric ladder that can be extended to the height of a 25-story apartment. The house we are moving into today is 14 stories, about 45m high.
All the stuff inside is safely packed and moved to the window. Now, let's lower the packed stuff. It's coming down faster than it looks.
Load the stuff onto the 5-ton truck. Pack fragile plates and bowls with bubble wrap. We've finished loading our moving boxes onto the truck! We're hydraulically folding the ladder back down. We're moving into our new house! Our new house is about 42 meters high, 17 stories tall. Now we're going to lift up our packed boxes. We can easily move an 88-inch TV with the ladder.
With professional packing technology, the TV was moved without any damage. Assembling the recliner sofa in the living room. Retrieving the mats that were placed on the floor to prevent floor damage.
We finish packing and moving by organizing the truck and ladder truck. Amazing Korean high-rise apartment packing and moving completed! "99.99% Pure Gold Bitcoin Mass Production Process. Excellent Korean Gold Manufacturing Factory" Take out the 99.99% pure gold bar stored in the safe. Melt the gold cut into a measured amount. Pour the hot melted gold into the mold.
Increase the density of the gold by hitting it with a hammer several times. The gold is rolled out thinly using a metal rolling press. It is repeated 50 to 100 times to make it thin. The thinly rolled gold is put into a punching press and cut into a round shape.
Prepare stamps with various designs to be engraved on the surface of the gold. Bitcoin stamp The design is engraved by pressing hard with a 200-ton press. 'Pure Gold Bitcoin' that can bring you luck and wealth is complete! "Process of Mass Producing Powerful Safety Shoes With Innovative Technology. Great Shoe Factory" First, a steel plate is molded to make a toe cap. The toe cap is cut left and right with a press cutter.
Finally, the toe cap is put into the mold to create the shape of the front heel and the ball of the foot. About 40,000 toe caps are heat treated per day. Heat treatment at a high temperature of 865°C with electricity and methanol. Wash the toe caps that have completed the heat treatment in water. We make the shoe uppers ourselves to enhance the functionality of safety shoes. Complete the uppers by attaching reinforcements to the heels.
More practical with special waterproof fabric. Apply latex adhesive thoroughly to the upper and sole. Heat the shoes at 90°C for 15 minutes to increase adhesiveness. The non-contact toe cap developed by this company has a streamlined structure so that the instep and toes do not touch the toe cap. It is about 35% thinner and lighter than the existing toe cap, increasing convenience and safety at the same time. Attach by pressing hard on the front of the upper.
Adhesive the back of the upper. Apply adhesive to the sole and heat-treat. Finally, attach the sole to the shoe. Put the shoe in the presser to strengthen the bond between the upper and the sole. 'Widen' technology is applied to prevent the little toe from touching the toe cap! "How to Make Floor Heating System With Incredible Speed. Innovative Korean Floor Heating Technology" The raw materials for the floor heating panel, calcium carbonate, carbon powder, and polypropylene, are mixed in a mixer.
The mixed raw materials are made into small, round granules. As the vibrator shakes, it sorts large-particle pellets. The granules are injected into the injection machine through a hose. This injection mold is made by injecting hot melted pellets into the shape of a plastic panel. This panel made of carbon composite material has the advantage of maintaining hot heat for a long time.
Finally, quality inspection is performed. The floor insulation sheets are laid and the heating panels are assembled on top of it. The panel can be assembled quickly without adhesive and can be reused after demolition. Connect the hose to the boiler hot water distributor. Insert the polyethylene hose for hot water into the gap of the panel.
Test if the hot water from the boiler flows through the hose. Connect the stone floor finishes one by one. The high strength of the panels makes it sturdy enough to hold any heavy object. The floor heats up quickly to 30 degrees Celsius! "Process of Mass Producing Kitchen Sinks by Automated Robots. Amazing Stainless Sink Factory"
First, prepare the stainless steel coil. This is an important step to prevent scratches by attaching plastic tape to the stainless steel plate. Now, cut the taped plate with a cutting press. The octagonal plate is made through the cutting machine. The octagonal steel plate is moved to the oil application line.
The robot is used to apply oil easily and quickly. The steel plate is turned over and oil is applied to the other side. The oil is applied to the edge of the steel plate to prevent the steel plate from cracking during the forming process. The oiled steel plate is placed on the hydraulic press for the first forming.
This machine presses the mold with a tremendous force of 500 tons. We move to the second molding machine to make the rim and drain of the sink. Now we move on to the process of cutting and trimming the rim. We use a laser cutting machine that can cut precisely and quickly. One cycle of cutting takes about 35 seconds. The rim polishing process follows.
After shaping and polishing, we move on to the cleaning process. Attach the anti-condensation pad to the bottom of the sink with the noise-absorbing pad. This is an important step to prevent moisture buildup. Now it's time to replace it with a new, durable sink! "Process of Remodeling a Burnt-Out Korean Apartment Into a New Home. Skilled Interior Design Skills" We are remodeling this apartment unit with signs of fire into a new home. Measure the level with a level to install lumber frames on the walls and ceiling.
Then draw vertical and horizontal lines with chalk line. Fix the lumber with an air tack gun. Move the window frames of various sizes with a ladder. This large window frame will be installed in the living room :) Align the window frame with a level to ensure it is horizontal. Apply silicone to the frame edges with an electric silicone gun.
Apply constant pressure to fill in any gaps. Fit the glass panes one by one into the fixed window frame to complete it. Now cut the drywall to be attached to the ceiling. Cut the drywall into a curve with a wood trimmer. Evenly attach the wallpaper, with the wallpaper paste applied to it, to the ceiling using a wallpaper brush, one piece at a time. Likewise, apply the wallpaper to the wall carefully, one piece at a time.
First, fix the base plate of the ceiling fan. Connect the motor and the base plate. Assemble the ceiling fan blades to the motor. The ceiling fan helps circulate the stagnant indoor air, ensuring a more uniform temperature throughout the room. The beautiful apartment interior remodeling was completed by the hands of experts!
2024-12-25 15:37
