Synology NAS DS723+ SUCCESSFUL RAM ECC Memory Upgrade to 32Gb. Успешная установка RAM DDR4 до 32Gb.

Synology NAS DS723+ SUCCESSFUL RAM ECC Memory Upgrade to 32Gb. Успешная установка RAM DDR4 до 32Gb.

Show Video

I welcome everyone to my channel. Good day to all. Many thanks to all my subscribers for showing interest and watching these videos. Also, of course, thanks to other viewers who came to the channel on topics of interest to them. This time the video will be slightly different from the standard content, but also interconnected in I’ll explain later how this is connected, so stay until the end of this video and then a lot will become clearer, I think that the explanation itself at the end may also be of interest in the further development of this content, it is interconnected because on my channel it’s mainly about Mercedes about some crafts also connected with watches. Now I won’t stretch it too much, it means that we have a server in front of you Yes, I think that many people know what it is for those who see it Vova us it’s an external drive which connects to the Internet, yes That is, you can connect to the Internet these power - this is a brand known in the market, one of the clear leaders, I chose it precisely because it supports its software very strongly and there is a very huge number of possibilities, this model is a server Yes, it is two slots Yes, I have two Here are the exus drives Yes x18 16 TB also has RAM one slot for 2 GB yes that is, this is the model as we see it is DS 723 PS and also two slots are inserted into SSD drives for the cache today's video, as you already understood from the title, will be devoted to expanding this particular RAM, that is, included in the kit. Well, already supplied. Yes, there is such a slot

here, we Let's put this aside, it's 2 GB If we can look and what is very important This is EC memory, yes, that is, this is memory that can correct errors of a certain nature Yes, it is used in server solutions, but 2 gigabytes is not enough for my purposes But what exactly are my goals I’ll voice it at the end of this video and why in general I decided to increase it. Accordingly, the question arose: What to increase with? Of course, Mar enology itself is quite limited in choice for this server and they set prices very high. There are two, there are two, and perhaps there is for 8 GB but they cost just astronomically yes Like half of this server itself So naturally I spent quite a lot of time looking for information on what and how and what is possible and also once tried to install ddr4 memory which is for laptops but not e yes that is, it is not [music] corrects the disks for me personally, at times it didn’t even start and so I settled on this choice of this brand. Yes, at least for some people

it starts very well without any problems and, which is very important, Here are its characteristics here two slots of 16 GB each, that is, 32 But this is ddr4 2666 MHz and what is very important This is EC memory, yes, that is , now I recently received it, so we will open it and install it like this This is how it is in the box yes Well, we will install it accordingly alone, well, the installation I think no one will be surprised, at least someone has ever inserted operational memory, he will know perfectly well how it ’s done here, just click here with the latches and everything else is exactly the same, it’s very simple it’s inserted like this , then we insert two hard drives, so everything is quite simple , the installation will be completed now, let’s go accordingly to the place of its storage and the first start-up and start-up will be carried out Well, I won’t write this down, it’s too trivial just start-up But I definitely want to demonstrate this Already in the system itself, I will show on the laptop whether the memory is displayed and, accordingly, I will show an important program from phenology that provides a check of the operational memory in order to exclude in the future these are all non-tents. Possibly, or at least immediately you will find out at the deployment stage that it may not be working or the server won’t start or something like that So don’t switch, for you there will always be a couple of moments for me it will take some time to configure the system Yes that’s it, don’t switch like that Well hello again everyone Now we have already moved to the table behind the work laptop and I will explain a few points that I encountered during the process of physically installing RAM, which means as you saw in the first part of the video it was 32 GB that I was going to install and there are two of them 16 GB dies means production installation of memory I think that’s enough simple As it seemed to me, but there turned out to be a lot of pitfalls, purely physically there are no problems with this, that is, you turn off the power, naturally we must be turned off, disconnect the network cable, select two slots with hard drives and then access to the operating memory slots appears in the DS 723 model and there are two modules which can be replaced in the original way, as I said. There were 2 GBs, so I want to put 32, which means I insert both dies, which means 16 GB each, and then I insert everything disks and I'm trying to start the device when I press the power button, a normal process occurs, but the light continues to blink blue those who are familiar with and the entire system does not initialize. That is, in fact, I waited right up to 4 minutes, the system does not start at all, that is, it feels as if the System does not sees this RAM operational memory means I can’t immediately either couldn’t answer right away why this happened I tried to insert the original memory again and it immediately started the server Yes [music] accordingly that was the situation it’s strange because you understand that you don’t know what to do; there are different manipulations; there’s disconnecting the memory; connecting again; disconnecting the power; connecting the power did not give any result at all; what ’s interesting is that then I decided to install one 16 GB board AND 16 GB of memory [music] the system started, everything was initialized, everything was fine, yes and it worked stably, but for some reason it was 32 GB. Yes, I didn’t want to be identified in the system. Although according to the characteristics of this server, this model

supports up to 32 gigabytes of RAM, this is official data force further I tried to search for information on the Internet in various forums and came across a very interesting article. By the way, I will definitely post a screenshot of the recommendation. As you can see, someone installed 16 GB from the company cral and he gave the sequence of actions necessary for the successful installation of the operating system memory, yes, that is, in short, see it in the image, but in short, it turned out this way, first of all, you turn off the power, which means you choose, well, all the wires must be turned off, of course. Then you definitely need to select both both disks to get to the operating memory slots and a very important point, this model has the ability to install an SSD, that is, two modules on nve SD drives, and in my case I just have 256 GB of them, and they cost exactly two so that there is a cache both for writing and for reading, and according to the instructions, after disconnecting the disks, this is a mandatory parameter, you must definitely remove these SSD drives, but under no circumstances should you remove SSD drives, just select the dies e SSD just took I stuck it out, I chose a very important point, I need it before this when the system was booting up to 2 gigabytes, I need to go to the storage manager and from there correctly disable the SSD cache, then it will delete all the data back. I will transfer it to hard drives and then you can do it without any problems, which was done a lot with all the disks. the SSD MVE drive were both selected and physically removed. Then

hard drives two were installed in reverse order and the power and wire were connected and was carried out startup And another very important point is after disconnecting the S drives after disconnecting the main STX disks, cold start the system by pressing the button, but a very important point is that there are no disks in the system at all, so that it is empty and you have to wait for that characteristic sound Yes, it beeps, in my case it happened I don’t know, within a couple of minutes it beeped and the light stopped blinking, but then on the server we just held down the buttons for a long time, this is acceptable too, there was a beep and accordingly it turned off and then, accordingly, installed the hard drives back and loaded system So far, without an SSD drive, Ilya, the system started right away Just as usual, that is, literally within 10 seconds, the system saw the operating memory, the disks, the system started, DSM started, the server started, and there is access accordingly. So, we already have access to the system, just like now, let’s see, that is, in pnl management I apologize in the information center we can look Yes, I just have a total amount of physical memory of 32 GB, we can go further from here to look at monitoring resources in the memory section and, accordingly, only 32 GB How can we observe that is, the system successfully started with 32 gigabytes of operating memory Also, after I saw that they are displayed correctly in the Yare system, install the drive accordingly. So, accordingly, they are installed and so the storage manager I have has a total complexity of 26 TB and here I have internal slots Yes, two disks are installed They are not yet configured for cache they are in the process. There will be settings later, but the main thing is that the system sees them and the system has an SSD 97 plus 900 250 GB, that’s the original and the hard drives are cgate on 16B x18 exos server this is what I would like to do next and this is first of all to check the operating memory so that in the future I do not encounter the problem that for some reason it does not work given that it is EC and that is corrective itself so I think that there won’t be any problems, but just in case I want to do a check, the check is carried out using the original ass program, I think many people are familiar with this. Here in this program I just launched [music]

Well, it has already found me. Non, when you first start it, there will be a bar here such a ze will work Yes and there will be a search if it is successful Find here the address give further here there is such a one at the top yes that is on Well the translation is wrong But these are the settings here you need to click and a very important point here you need to check the memory testing box and in order to proceed further Yes it is necessary for this option to appear here at the top yes Because if I remove the press it will disappear press press memory test Okay and it appears here too, a very important point when clicking on testing yes And by the way, there is a need to highlight this strip, that is, we need to select exactly the server with whom we will work if it is not selected. And for me it was so that it is not selected, this is a button. You just press it, it doesn’t work. Well, it is already selected for my memory testing and then it means that it is warned what the server means will be rebooted to perform memory testing, access is limited Until the memory is completed, the duration may depend on the physical size of the memory This is from a minute to several hours, I’ll tell you right away So when I installed the board at 16 GB And what about the rel started to check, suddenly there was a problem with the 16 GB memory me I tested it with this program in the area of ​​4-12 hours, that is, I can assume that if the process starts now and I want to run it on 32 GB, then it will most likely be around 8 hours, which is what we will do now, yes now it’s 11 am my time 1106 means click next here it requires accordingly to enter the administrator's record [music] and we begin to complete this will start authentication accordingly And that's all And now the service is rebooting now the line will go it will reach 100% we'll see how events will develop, so a reboot occurs in advance I apologize for the quality of the image, if possible it will be reflected incorrectly This is a video capture program and for sound because after all, I don’t have a professional microphone at this stage I will try to improve the sound as best I can Well, here the emotion is mainly focused on what and how and why [music] [music] [music] So, that’s how we see it means the check has begun. Don’t pay 100% attention, it’s just that the server rebooted here you can safely click on completion and here the most important thing here is that the execution of memory testing is now naturally 00 and you need to wait accordingly and this process will last at least 8 hours, that is, I don’t see the point of recording all 8 hours because the process is very long means now I press pause and then we will return after the process of performing memory testing is completed, then we will still if Well, let's hope that the test will be successful, I will also demonstrate demonstrate how to get more information about testing this particular memory like this, so now I press stop and don’t turn it off for you it will be literally a moment like this Hello everyone again like this Well, that means after starting the memory testing check, as I expected, somewhere between 7 and 8 hours passed at home there wasn’t at that moment But I tried to periodically restart the server remotely via the Internet and, accordingly, at one moment I launched it, I conclude that this is between and8 I don’t understand local time it’s just that I returned late yesterday and that’s why I was only now able to continue with this video, that means that we see thank God Yes, the status here is written ready, it means the memory was successfully checked, all 32 GB yes So it’s already possible to close the program, it completed its task but This state is ready, it somehow looks quite dry, that is, nothing. It says nothing at all, that is, that it is ready. What modules are there at

least something? Yes, at least some logs, for example, and yet Let’s try to connect to logs exactly on the most remotely because as such I just took the logs, went in and opened them too, I didn’t find the kra anywhere, maybe someone who knows will correct me and say that they are somewhere, but there is another way, at least one other way how to connect it means to the operating system Yes, remotely, bypassing it in a different way Yes, and try to get to it, let’s do this now. That’s why file services are broken. So no, not file services. So, go to the terminal and snmp and enable the service SS yes those who know Well, accordingly they know and those who this is possible for the first time service S This can be said to be a network protocol that allows and performs remote control and connection to the operating system Yes, also using the m tunnel and well, it is similar to the telnet and rlogin protocols, but it is also a plus Another thing is that it is encrypted, here we click apply, yes, that is, we include it here, of course, it shows what is needed. So the terminal needs to be very careful because it is unsafe, etc., etc., you can read it by clicking Okay, so the service is turned on, we close it and we need to log out of the system from the server, we don’t reboot, we just log out like this, we log out next, we need to run the terminal program, it looks like this console panel [music] So now we will enter certain commands in order to connect to the server itself, yes then [music] [music] is here what happened I entered the command account that was created temporarily for the administrator account, then it goes exactly I address in this situation it’s just static address and then you need to enter the password, don’t be surprised, I will enter the password. Non will not be displayed

in the terminal itself, this is apparently intended, but you need to enter the password correctly [music] this is the message, yes, that is, it was already connected before this, there may also be a message stating that you need to transfer the so-called key Yes, it’s called ecds, a message will appear there and you just need to enter the word yes, that is, Yes and then enter the password again Yes and then it will be Now that means it already happened I already just did it with 16 gigabytes so most likely the Key has already been transferred to My terminal, so this situation will not happen again, here again this message appears that this is unsafe, that you need to be careful, etc., etc. And now the most important command is yes [music] [music] so we check that everything has been entered correctly sudo Cut Warlock Messages then grap M Test and press Enter again, a password is required, we enter it and press Enter So probably I entered the command incorrectly, double-checked the ST or perhaps there was a password entered incorrectly repeat [music] no Okay, let's try again because the first time when I did this with 16 VA all this [music] worked so one moment I double-checked if I wrote everything correctly so we will write down the court cat space [music] sshk a [ music] so enter [music] Password yes, it was clear that I made an error when entering the command or perhaps the syntax, perhaps I entered the wrong password So now we see Yes, that we got access specifically to the logs Well, partially, but still at least something is already yes, namely from the Host, which means that 1 2 3 4 5 6 7 8 9 here you can see Thank God that everything went well Yes, successfully, that means the memory is working in principle it’s normal and the server is also working fine, just like that, in this way, you can see how the test was carried out, well, and accordingly, then we exit from here, write the command Exit and exit again, then then we’ll log in again, yes. So what? a very important point to do is to naturally disable the SS protocol because, after all, it is only needed for certain scenarios, the same goes to the Control Panel terminal and naturally disables the service Those who have it enabled, for example, also need to delete the rules there if it was enabled before If but it wasn’t like that, in principle there is no need, the service is disabled and everything is done in this way, yes. That is, you can check the working memory accordingly and now the system has 32 GB at the very beginning of this video when I showed the memory itself there you can see its characteristics I said that there is a certain idea Why do you need so much memory? Well, there was a choice either to put 16 for example, or Why not put 32 if there are two slots? If it is possible to purchase such memory, there is never enough memory, but for the average user, if anyone deals with some kind of documents, maybe video files in this particular model, 2 GB is basically enough for the eyes, but for a more serious task, namely in my case, I want to create a virtual machine, a virtual machine in order to subsequently install it on it and the image is basically recorded on the Acronis program with a software program for Mercedes, the main programs, that is, Cara, specifically for diagnostics and, accordingly, other software that may be needed Yes, but not to install all programs from scratch, namely, installing the image created by Acronis, that is, on the operating system, yes, that is, first the operating system will be created system and then an image will be written to it Yes, so that I can later connect to this virtual machine anywhere from any computer if there is a need, for example, to get information about spare parts or about the repair process or about recommendations or that is, how is it disassemble something, and so on, etc., etc. I think all those who

work with Mercedes know very well what the Asra visa and EPC for spare parts are, and then there is Monaco visible and all these programs. I do not intend to use a virtual machine to connect to the scanner because that I have a separate laptop on which the same NT is installed and all these programs are installed separately and a physical multiplex is connected to it, I have a third one because I also have a Mercedes 164 ML body So this original multiplex C3 is enough for me, which is perfectly executed, plus it’s also on NM and online programming allows you to expand the Range of actions and the Range of programming in general, I think that anyone who understands this understands what I’m talking about, so here’s the information Guys yes, that is, a huge thank you to everyone who watched to the end. I hope that this video will be useful to many, not only to those who would just like to update their memory, but also like here’s an idea for installing a virtual machine. I

’m going to do it in the future. If I can record it a detailed video of exactly how I installed the virtual machine itself and installed on it, accordingly, this image already ready for Acronis. And then I launch the virtual machine itself. So don’t switch guys, I’ll be grateful for likes and subscriptions. That’s how this greatly allows us to develop the channel. so have a good day everyone, no Pooh, no feathers, No nails or rods on the road, this is the most important thing as a driver. I think that’s it guys. Thank you all so much again and see you all bye bye [music]

2025-02-03 13:06

Show Video

Other news

The iPhone was 3G's Killer App 2025-02-13 00:26
The Future of the Automotive Industry: Innovations, Technology, and Sustainability 2025-02-10 23:05
I Learned Python By Building These Projects - Tutorial for Beginners 2025-02-08 15:45