Инструкции EAGLE and HOOK Reveal LOWRANCE видеомануал
hello friends This will not be an ordinary non-standard release, which is supposed to be presented in a presentation that is completely unusual for our channel. But the fact is that the quite popular khalots from Lawrence Eagle and Hook, for obvious objective reasons, are purchased mostly by older people. Along with the store employees, Alexander Khovrina, I help set up echo sounders almost every day via video link and get acquainted with the interface of older generation comrades. It is clear that it is quite difficult for them to perceive my expressive Spanish presentation in training videos. Therefore, I will try show and tell as smoothly and intelligibly as possible without rushing In general, this issue is dedicated to our fathers whom we certainly love, respected and respected. And of course, to people who have had no previous experience with echo sounders. So the first
switching on. So the first switching on. A menu for selecting a language appears in front of us. Select Russian. The device reboots. A warning message appears, the essence of which boils down to the fact that the owner takes full responsibility for all the garbage. Accept. The echo sounder will offer to configure the device for us in fact, we need to Select the metric system And with this the configuration is essentially complete We get to the registration menu But due to sanctions and other difficulties, we are not very interested in this section Since these echo sounders do not have multi-touch control, the echo sounder is adjusted using keys Let's study them So the top left key opens the main page Pressing the main page key again takes us to the map The next key is setting a point, but we will return to this Next is the control dial In fact, there are four cursor buttons that allow you to move through the navigation menu and directly the cursor on the map or in scanning programs. Diagonal movement is also possible. Cross key Removing the cursor or canceling the selection, depending on the situation. Enter key, confirming the choice, displaying information on the screen, checking a box, and so on. Depending on the situation, use the plus and minus keys
to zoom in. The next key, calling up the menu, works directly in program windows by calling the context menu. In this case, controlling the display of the map And the power key remains A short press calls up an additional menu Passive - hardware switches the echo sounder to energy saving mode but reminds you of itself by periodically blinking the screen Settings Go to the homing settings We 'll come back here Power off Well, everything is clear here Brightness Adjusting the screen brightness night mode on and off So overlaying the data on the screen That is, we can turn off the readings You see they are missing And we can also turn on the display of all these readings Editing these very readings We also let's go back For advanced users, there is a recording of the ichogram stopping or starting Sanar and registering But we are not interested in this due to the sanctions Let's exit Now the important point is that repeatedly pressing the power key will cause the screen to be adjusted in a circle, so to speak. This is an operational adjustment of the screen brightness. Please remember.
So, for obvious reasons, maps of the United States of America are initially recorded in Holot's memory, in general, those places that we rarely visit. Therefore, there are several ways to solve this issue. The first and most correct one, in my opinion, is to purchase maps CMAP of your region For example, in the Alexander Khovrina store They are delivered in such beautiful boxes, recorded on a high-speed, reliable Sundisk flash card and display the general position of the reservoirs of your chosen region, indicates the main differences in depths, forovator, navigational objects such as buoys and other infrastructure. And with such a map, you will never get lost on an unfamiliar body of water. And you can always supplement this map with your own drawings of depth maps, which we will talk about below. There are also various free maps on the Internet that you can download and install on your own flash card, but I can’t vouch for them. In addition, they usually
do not contain navigation layers that are generally necessary to ensure safe navigation and some kind of orientation on the water. Or you can only use your own renderings of depth maps. For this you will need an empty, clean high-speed U3 flash drive of the tenth class with a capacity of up to 32 GB formatted FA 32 But in no case please do not buy flash cards on Valbury Ozoon and other similar online sites There, unfortunately, there are only fakes Buy only in trusted stores Recommended manufacturers SunDisk Samsung and perhaps Kingston Now we insert a flash drive with CP cards purchased at the Alexander Khovrina store into the slot for micro SD cards So we see that we have navigation maps of rivers In this case, the Volga in the Kolyazin area And here you can already navigate We see the Kolyazinsky bridge and so on In the map menu, go to more overlay options Turn on the GLife layer And now on top of this map we will draw our own depth maps You see, I now have depth maps that I drew in this area earlier Only due to the fact that these devices are the youngest in the line, the damned capitalist decided to save money and not pay for patents and licenses Therefore, in In the Icholot menu , you will not find the inclusion of a color palette of depths and a menu for independently coloring the palette . However, there is a way to bypass a number of these restrictions. To do this, we will need a personal computer. I have already described this method in a separate issue. Let's look at a fragment of how to do this. Both in the previous version and in the new one, the interface does not have the ability to enable tightening of depths. That is, there is no way to independently color the depth ranges, which is called
taste and color. Either Lawrence is tight-lipped and does not want to pay for licenses, or deliberately strangled this type of functionality so that life doesn’t seem like a raspberry If you want a palette, buy a more expensive device. Fortunately, people have learned to bypass this limitation using a configuration file. So, a short
course. Export the halot settings to a flash drive. Let’s go to storage. Install the database. Select a flash drive and assign a name to the settings file. Let it be Settings 01. Take out the [music] flash drive. Here they are, the pain of suffering. Open the flash drive on a personal computer. We see that there is our file. To edit it, we need a more advanced text editor than the one included with Windows I recommend nott+ Download the version that matches your system In my case, sixty-four-bit I have already downloaded it, I won’t repeat it Installation Launch Notepad+ Drag the configuration file into the editor window Don’t be alarmed by seeing such rubbish Open the file with examples of the palette Select and copy a fragment of the first line up to the equal sign In the editor window, press Ctrl F paste a fragment of the copied line into the search engine and find the block we need Copy the buildings from the example file Delete similar lines in the configuration file Paste our example to save as we call the file settings 02 Now copy the resulting file to a flash drive In general, everything is ready I will leave all links, including to Notepad + and to the sample palette file, for you in our Telegram group Download and use it to your health Now insert the flash drive into the iHold Please note that This flash drive contains two logical drives with CMAP cards and NavionK cards two in one Very convenient You can buy one in the Alexander Khovrina store Supplied in a very convenient plastic box Look how lovely The cards are recorded on a proprietary, very reliable and high-speed flash drive Sundisk of the tenth class U3 And discounts are provided for subscribers of our channel in the store So we find our edited file on the flash drive and import The device reboots Oh look, the colors have already appeared But our own GL renderings and also single-color ones Go to the map settings More options GL Options Depth palettes Set by synchronizing the map And now we have a beautiful depth palette We will talk to you in more detail about depth palettes in a separate issue I hope you can figure it all out And for those who do not have this opportunity, I will leave in our Telegram community a link to ready-made settings files for Eagle and Hook Review We will be glad to join you Link to the group you will find in the description Next in the menu there is a map orientation Directly when fishing for points, I recommend setting the classic display of north at the top and you will not have to turn the map And while following a route or while trolling, I recommend switching to navigator mode To do this, set the course up while simultaneously turning on the option to look ahead Excellent To set a point, you need to move the cursors to the place you need on the map and click on the button marked with a flag. Assign a name to the point. I highly recommend doing this on the spot, since hundreds of different numbers in the future will not give you an understanding of where which point is and what. Also, you can immediately assign a specific sign and color to the points. Now let’s imagine that you are at
home and would like to look at your point. And here we are faced with another cutback. If on older models we can easily go into the search and immediately select a point in the menu, then here we are faced with the fact that your point will only be found when searching with an exact match. In general, we ruined the tool, but there is an alternative. We go to the main page, points, routes, and in the points tab we see our points, select, move the cursor to the on-screen display button and we are already there. I really
like Lawrence’s simple way of moving the screen to the position of a subpoint and I really miss this functionality in GRMIN Now we go to Sounder This is a classic sonar for displaying depth and pilological objects Short press the power key and launch eolotot It turned on, but since we are at home, naturally it will not display any data to us because the sensor is not immersed in water. Let's switch to the simulation mode to demonstrate its operation. To do this, go to the installation, find the cursor to the right in the left column of the simulation and turn on the demonstration mode. The echo reboots. Below we observe the bottom and a general representation of its density And in the water column we see the arcs of fish Not in the simulation mode, pay attention to all the data in the imperial system FuT Emily and so on By default, auto-tuning is turned on and in most cases this is enough. If manual tuning is required, you can select the following settings. Depth range It rarely happens that you need to turn it on, so I recommend using auto [music] Purity The frequency range is determined here. It is necessary to take into account that the higher the frequency, the narrower the space being surveyed under the boat. Our channel has a video about the work of Sanar. I recommend you read it. There is also a sensitivity setting
It allows you to filter additional small objects and debris from larger objects There is an adjustment of the pulse frequency elimination of interference elimination of surface interference color accentuation to create a color accent to the density of the observed objects And we can also change the palette For example, in the dark, I recommend darker colors so as not to dazzle Other settings for more advanced users I do not recommend messing with them at the moment So let's go to the bottom scanning mode Despite the fact that this scanning mode is very similar to the previous one, it is distinguished by less averaging of what we see on the screen You can say it helps to understand with almost photographic accuracy what is actually located on the bottom And also exactly it helps to distinguish the fish The settings are poor, but just like in the first case, I recommend auto-depth contrast adjustment for specific conditions There is also auto-contrast I think you can easily figure this out yourself directly on the water And actually also the noise filter And also the choice of [music] palette And side scanning This type of scanning differs from the previous ones in that it shows not the cut of the water, but the location of objects to the right and left of the boat And as in the previous case, it’s enough there are few settings The range is also adjustable with the plus and minus keys. Well, in this case, we have the size in feet. The choice of frequency is 455 or 800, but in the simulation mode the frequency cannot be changed. The settings are poor. Also, contrast adjustment for specific conditions [music] There is a surface filter. You can display a distance line, but personally I don’t use it. And also change the palette whichever one
you like best and is suitable for a given frequency on a given section of the river with a given type of bottom. Also, when choosing a palette, you should take into account the time day Fortunately for users, most of the settings are automatic, but there aren’t that many actual settings Let’s exit the simulation mode And now let’s move on to the settings First of all, we are interested in the unit of measurement Distance kilometers small distance - meters Speed is set to kilometers per hour depth - meters altitude - meters direction of movement temperature in Celsius It seems that everything is clear On the map you can turn on distance rings In this case, around your boat So let's move on, these distance rings will be made The scale of these rings is indicated in the lower right corner And they are generally very dynamic I could somehow control this scale manually, but it would be a useful tool. But I don’t see a very strong need for it, but many people like it. Go to maps. And you can turn on coordinate lines, points, routes, so that your routes and, accordingly, tracks are reflected on the map.
Next, you can record techograms, but I don’t recommend this for beginners. Signals Here we can turn off sound signals. For example, a sound warning about the loss of satellites. We have already analyzed the units and simulation and will look at it in the system Selecting a language Setting up the vessel Here the long dimensions of your vessel are set, but I’ll immediately warn you that the translation is not very correct. This is necessary when you go along the route. But since such idles are installed
mainly on small boats, in general, the setting here is useless for us. Text size, honestly, I’ll tell you, I don’t know who is small. It’s normal for me even with glasses. Well, it’s already difficult to read. Keyboard signals at home are set to quiet, and directly on the pond, loud. Time We set the 24-hour format, which is the most convenient for us. familiar And you can set before the first reception of satellites a time that is as close as possible to the present. This will shorten the first search
for satellites. And what’s interesting here is the initial settings. If suddenly for some reason you are confused in the settings or want to register for the cold, come here and mark the first two checkboxes so as not to lose your routes and points. Well, you can also put it on the registration of the device insofar as we did not register it. Then click “Yes” And you will be reset to factory settings. Well, we need that now we don’t need Next, what’s interesting about it? Extended Well, to be honest, for an entry-level echo sounder there’s not much here that’s interesting that could be changed. So, it’s very much cut down, to be honest with you. Navigation And here, too, nothing interesting. In general, don’t be afraid. Echo sounder is quite simple and in fact very easy to learn. Therefore,
for people, let’s say, of advanced age, where each setting causes some kind of fear and nervous experiences, this is one of the best options. But still not for long periods of time. navigable reservoirs Try to keep an eye on this somehow Because there I still recommend more serious devices Well, in general, let’s probably end here. If you have any questions, do not hesitate to ask them in our Telegram group, the community of fishermen and water motorists You will find the link in the description And I would like to remind you once again that this issue was asked to be made by the store employees Alexander Khovrina because they are very, very worried about the older generation, understanding how difficult it is for them to understand these Internets there are all kinds of you Also you can look at the tests of these echo sounders that we carried out directly on the water in the fall I’ll leave a link to the video in the description Don’t forget to subscribe, like and remember, they won’t teach Vokhoma Do you think it was clearly explained I think yes They’ll figure it out Oh, but I tried to talk slowly You’re actually great Good You fell asleep again Yeah
2025-04-15 10:15
