Hello, some time ago I reviewed this kind of battery-powered soldering iron, some of them I bought not too long ago, I bought it a couple of times already, it’s an interesting, cool thing, but questions arose: what kind of battery is there, and so I was interested in disassembling, as they say, assembling, assembling, we all know how to do it, but we don’t always know how to disassemble because sometimes we break things, today I have this kind of metal file that will help us with this, I have my Roxon multitool, there’s even this one for wood, this healthy one, but small zer I don’t know let’s say so [music] I’m prepared and we’ll try so at what point why did I think that it can be taken apart, it means we have two plugs on both sides mm and they don’t turn, that is, it’s definitely not a thread, they ’re glued on, well, as I suspect, uh, like the Chinese do here, a drop of glue, that is, it should be very easy to understand, besides, I found a screw here, which means it’s still disassembled, I initially thought that I could somehow saw off this front one part and it’s possible to pull out the whole mechanism, but if it’s if there’s a screw here, then most likely along this line it can be divided into two parts, you just need to make these parts, which means, as I said, I have a few files, we can go the hard way by filing here, but it seems to me that we can have an easy way and let’s try this, we’ll remove the files while in place, which means what I want to do, I suspect that there ’s not much glue here, which means we’re doing it like this, pressing it in, that is, I’m trying a little deform this plastic, since here it’s plastic, uh, in such a way that when deformed, it begins to shift a little, and those surfaces that are glued together, that is, they are glued together, if deformation occurs, they will somehow move away from each other and most likely will most likely come apart, so the next thing we do is take a knife and try to carefully wedge it in , and with this action I’m trying to pull this thing out for a break, so it seems to be going x it’s even easier simpler and faster than I thought ha, we didn’t even need beer, well, yes, and now we see that we have two screws here, which means there’s one here, which means there must be something similar on the other side, and you can’t just remove it well, we move on well, the main thing is carefully, that is, I insert the knife and like that, I’m trying to move this thing at a break, too, it goes hmm, and the box just opened, it’s really all much easier than I thought, so this is the back part, this is our USBC, and you can even see, in my opinion, a piece of white, that’s probably all the glue, yes there’s something wrong here, it’s probably some kind of remnant from this that has spun or that it’s on the other side, but on the other side, well, it’s like a real drop of glue, just a drop of glue was put in and closed, it’s cool, so here we have two screws on the other side, two and here one, that is, five, so I’m glad of course that I didn’t have to saw [music] there’s a chance that I’ll fix it, so it will still work, of course I’d like it, but I have hope, I have this interesting little one a set on both sides of the bits are all on a magnet and somewhere here on some side Yeah, since the screwdriver is so we need a Phillips and I don’t know which Phillips we need, well let’s try the average one so how can we get it from here there is so I ordered some time ago such magnetic plates are on double-sided tape they are glued on one side so that you can cut out a piece they glued to one surface they glued to the other something so light you can hold it but I saw that this the plate can be used as a kind of stand for some small metal things, they will lightly hold on to it, but if I have a metal knife to the knife, something is not attached so tightly, yeah, the knife has a few magnets, that is, it should hold some light things and should be good, so the knife did all the work for us, we close it, so we will have the first one, oh, even in my opinion, you guessed right with a screwdriver , well , it holds oh, it’s cool, a good thing, you can put nothing anywhere weighs like, for example, metal magnetic cups, but small things like small screws can be easily folded, so we’ll probably put them in the order in which we have them because maybe they are different, for example, some are shorter at the edges, yes they are different for us, and so it is, in my opinion, even without any [music] sealant so we have the same ones here, yes, everything screws on normally, so here it also holds, yes, everything holds perfectly, so now it should open somehow, yeah, that is, it doesn’t even take much effort, the main thing is to be careful not to break anything , so why doesn’t it want to come off here, like that, I can already see the battery, there’s a finger or little finger one, now let’s see , oh, what was that here, yeah, a button, probably interfered with us , so this is how it all looks inside the little finger [music] battery like this 3.8 V so I think you can see how many 800 mAh there are so you have to take a second, what’s surprising is the battery even with the marking as not some Chinese cheap ones that don’t have any markings, everything is written like this [music] it’s written like this yes 800 mAh it seemed to me 500-600 lyon Cell XM ICR 1450 but no 1450 - this is a finger type, why did I think that it was a little finger one, for example, yes, it’s a finger type, 1450 is 14 mm in diameter and 50 mm in length for 800 ampere hours 3.7 In the floor, it’s not bad, we at least found out how it’s powered, if suddenly someone wants to change it can always be done like this, we just have a button two [music] LED so well, I took it apart nicely and didn’t break it, plus now we have to be careful put it all together so I put it together with a button or something like that yeah that's how it should be so it's a metal part it feels like it's also glued here, probably it was glued a little because it was so hard to open well, we won't peel it off like that in my opinion it should stand somehow like this and now it should be assembled yes the markings are normal so everything is there neatly that where it doesn't fit there is so we check that everything is still working there is turned on 1 2 3 and it turns off too fine so if suddenly you want to find a better battery, you can always find a 1450 cell and replace it cool, so I tighten it, but not too much, I suspect no one has ever unscrewed it, I don’t want to break it, even though I bought it cheap, but still I tighten it very lightly, very lightly, so we put the central screw on here, it fits tightly enough, there are no problems, at least it’s not visible, so here it’s correct to put it on, so the USB is super super, so the only thing I still wanted to try to understand is at least how what the temperature is soldering iron, I just have a thermometer for such purposes, now we’ll try it because what they describe is one thing, but sometimes there is such a moment, what is this in reality, we have something completely different, so we have instructions, then we have a tip [music] insert it, and now we’ll try to check the temperature, I have this tester, so we don’t need that anymore, so we don’t need a knife yet, so regarding the temperature, what we have means the first 30040 second gear type 350 380 just on the second zone already and the third 390 420 that is, on the first it should give out 340 380 on the second and 300 and 420 on the third, let's try, even I wonder if it gives out the required temperature so how where to connect the temperature so black and red where is the temperature here yeah so if you hold your hand what we will see and what it shows is not before so what to switch it is necessary so that the temperature is yellow so here are the degrees Celsius is in my fingers, it shows 32°C, so you can see, let's now try the soldering iron, so we turn it on, it's turned on, so the first first it should heat up quickly enough in ran ran 80 so I don't need to solder anything 125 139 So I don't understand what kind of 340 we should have that solders it already so 180 200 so I don't understand anything either I'm doing something wrong or I'm holding it in the wrong place let's go here the idea is 220 and that about 300 338 340 there is found where to hold it so this is the first position we press two should give out 380 so somewhere again I’m holding 320 wrong [music] 330 here’s 340 there is so probably I’m holding it wrong again well 350 gives out like this but here in the middle for some reason there is no such temperature just yes well here I suspect I somehow I’m holding the thermometer incorrectly, here it’s 380 388 400 even 380 that is, somewhere around 380 it’s definitely like that and we’re checking the most powerful mode should give 420 380 so again I’m probably holding it wrong no like that 360 let’s change the position like that 380 [music] was hmm here it’s wrong at least like that [music] 380 well [music] 390 well 400 he definitely did here there must be 420 somewhere the error of my measurements is probably somewhere I'm poking incorrectly no well at 400 I don't know since the first two were 340 and 380 I have a suspicion that he will also pull 420 so now turn it off press and hold 1 2 3 blinked turned off I wonder how quickly it will cool down yes it will take some time although it heats up really quickly seconds probably how many well 10-20 seconds and it had already started smoking it was already over 300° it was already less than 200 well, probably about a minute or two and it should have cooled down by now 130 already well less than 200 well, literally, as some people say, go smoke a cigarette while you smoke a cigarette it will just stay, that is, it needs a couple of minutes to cool down and very quickly pick up speed already less than 100 degrees a little more and, in principle, it will be already not so hot it’s already 70 well, it’s already less but in principle it’s already normal so here’s a reviewer that who asked about the battery now you know its model and its capacity I hope too if I don’t like something I’ll try to find a 1450 battery with more capacity it will probably be cool if anyone liked the video please like and subscribe if you have questions ask in the comments and good luck to everyone here
2025-04-26 12:24