кинокамера Спорт 3 Ломо movie camera Sport 3 Lomo

кинокамера Спорт 3 Ломо movie camera Sport 3 Lomo

Show Video

Hello friends Today we have Sport 2, but not about it, but about another film camera similar called Sport 3. Today it came to me and now you can see in what form it came to me. Please note. Just put the new suitcase aside for now. Sport 2, this leather used to be made from leather, according to documents, a film camera from 1966, and this is apparently still. Previously, I just don’t remember, I once had the documents and now there’s nothing, only the case remains, I’ve already opened it, looked at it, even made it prevention I’ll just show you how it came to me in what form, look The cord, or rather the strap, this is how it looks like we have a movie camera here, documents with a passport, in general, a passport, a pen and such a small prison, but by the way, it’s like this, as if moisture had somehow affected it. Well, Dubova became such a movie camera, of course

, they used it, but not for long, I understand. Apparently they played with it, bought something more serious, because this movie camera is one of those very simple, I didn’t notice that here the counter is not in the zero position and opened the lid Well, I opened it like that Let’s press it, it’s clear that the handle was working, they just apparently didn’t take the bag with them That’s why he looked like this Looked like it got in, apparently it could be moisture and all that Well, in principle, everything is in good condition for the sixty-sixth year, I scan the instructions at the end of the video, I’ll upload them so that they can familiarize themselves in more detail Because the problem with instructions is always that there are few of them And that ’s all paid so the serial number matches like that Well, let's look at the movie camera The first thing I noticed was I started rotating this diaphragm disk and I have a front one. I mean, the inner frame also started while I figured it out in general I realized that it was supposed to sit on the paint, the paint must have dried out or maybe it was twisted too hard And it fell off the thread I took it apart and instead of paint I used this kind of glue I don’t know yet it’s still fresh it will dry So well, let’s open it and see what I I discovered I opened this lid and I see here a film film, you see a film film here. So, since here is the second reel, it apparently must be original here. So the film film was already shot on this one, first they turned the film over and already started shooting on this one, and after that everything stopped, let me take it off and we will compare it with the Sport 2 film camera, it’s clear that it was not the seller who loaded it and didn’t even look at it, you see. It just dried up in this position here. in this position and let's shoot it, I'll take it off And then I'll develop it, so let's look at the fact that we have a frame counter here. There's a countdown. That is, when it's full of serving porridge, it shows us,

it means that the stat starts at more than 7.5, we skip the fact that in the Light we reach 7.5, and then we can make a guaranteed shooting that it will be something, it's exactly the same as this movie camera, now I'll remove it a little, the covers are different, the same thing here with it’s filled Look how the lids are different here, apparently so that they don’t press the film so hard, it doesn’t scratch, maybe because here Yes, they’re sharp, maybe it doesn’t apply in view of the spherical winding of the film, well, there’s a sharp point here Well, I don’t even pay attention whether it scratched me or not, but although I shot quite a bit on it, by the way, let’s try Is it suitable for this movie camera, yes it fits perfectly, fits perfectly and is fixed, that is, Sport 2 already We see that fits look here's what I noticed here is the pressure table in the third model Here we have the third one in this model, we have a pressure table made differently it is not removable if here It is removable like this, like this it is removed you can charge it without removing it just pull it off and keep pulling it off and pressing the film and film films are used like this 2 with regular perforation is not great also with regular perforation I don’t see anything you can also use these types you can’t here like S and A here 1x8 and if also 1x8 you can’t use it either, only 2x8 with regular perforation, most likely the internal mechanism is the same, I somehow disassembled this one Yes, I see the difference there is a roller here, the roller is already visible here in the lower part, only the roller is here I like this better with this roller Although I don’t think it’s worse The main thing is that the pressure table is good now on the pressure table here It’s like this and it’s metal here it’s plastic or something Yes it’s short in area and it’s plastic now look further the grab mechanism is here And here it is in this place Here Pay attention Although there’s a cutout here it’s interesting and they’re different And this one click and they lifted everything up and opened it up, maybe charging in it is more convenient faster Although this is also very fast, everything is good, in general 2x8 never causes any difficulties, it’s always easy to load and these ones are rubberized here the diameter in the new model is a little larger, the movie camera is almost in perfect condition, it’s great, of course, let’s look further, we figured out the internal part 2 x 8, a very reliable format, no slippage, more reliable, perhaps it was the same as something similar to this movie camera. It came with a Sport 2. It came with an exposure meter attachment. I don’t have it, it’s also gone, it’s screwed on with this screw, it could be removed, and so I didn’t work with it because it’s already over time. the selenium photocell got hooked and it no longer gave such accuracy, it engages if you buy an attachment, but there is a plug here, although you can unscrew it here and you can screw it in.

So this side we have already seen the font The same and the font is the same up the back part, the bottom part, everything is exactly the same, everything is exactly the same, the difference is exactly this table we press, we understand, or rather, we lift it up, pulling it back when it’s just a lock and everything is here like this, they pulled it back, they put in the film a little bit like that since in Krasnogorsk 3 everything is in place further along the aperture is the same 2.8 -11 viewfinder is the same very small small somewhere in the distance in the distance of the tunnel I will now open this part and we will see what is inside here the battery compartment This is how it looks here there was foam rubber it turns out here in this movie camera we will also compare the same foam rubber here I was not there When I took it in the eighty-sixth year I bought it there was no foam rubber here already glued foam rubber but it crumbled and I decided to delete it there video maybe I’ll throw it off if I don’t forget earlier Can you imagine I had a choice, see how it oxidized I had a choice to take That’s the option and there were also finger-type ones, but I didn’t take finger-type ones because in Soviet times they were somehow very much in short supply, so I took three fingers of such a case, now I’m looking for such cases everywhere, but we have a shortage of finger-type ones. Well, if you want, I’ll probably buy metal hydride ones and I will have a battery so I close it here until I feel it here like this you see under the cone it closed a little I have never used it I have to read in the instructions there are instructions I can read now I can read it now and I will probably do everything I read it means this is a socket for connecting an external power source like this it means so uh Here we have a PR switch that it is parked somewhere now what is it called here fuse Exactly probably pre to prevent spontaneous activation of the mechanism the button must be turned to combining the dots on the body That is, it’s like a fuse, so we have this inscription, we have a fuse, that is, the button is blocked, this is our time-lapse shooting, you can use time-lapse shooting and 16 frames per second, like this, we translate this here, frame-by-frame, we translate this, we have shooting 16 frames per second, with a frequency of 1440 in this case, we have 1/0 this is important The EU decided to shoot animation here it is with a movie camera, maybe here I don’t see anything like that, I don’t see anything like that here even with this attachment Well, I see that it doesn’t switch or switches Well, in general, here I don’t see that it somehow switches here, too, an external power source and so on, so the viewfinder viewfinder like there is just such a distant tunnel that a very small image is just a frame to see where you are pointing the camera and still there is no focusing here, only the aperture and everything is still a cap Yes, the aperture I don’t know, you can’t see it, but it’s working, everything is of course perfect. In general, it’s beautiful in comparison, here’s how it’s been a little changed over the years and the lens is a little bit That is, it was very good, excellent storage and was not used much because I look at the edges on the sides Compare here almost perfectly Here everywhere Here are the covers Here you see the difference is used and almost not used practically Neu new practically so well on the film camera we went over nothing like I didn’t miss that, that is, here the designations are like this is like the Starting mark and this is the final mark and our useful shooting is from A to 7.5 Although in reality it is written here that here it is 7.5 m but in reality here about 10 m is 9 and a half I have already developed how many films and people sent 10 m Here 10 m is a guideline. That is, if you charge it in the dark, then you can

immediately shoot from the start and you will have practically 10 m, which is about four-plus minutes, two sides, if we, for example, have one for two-and-a-half minutes and the other two-and-a-half minutes, you will get 4 and a half minutes. Maybe even more. The truth is that you need to keep an eye on the battery because there is no indication that it has run low. And when it runs low, well, you can hear it. Of course, the guideline is that the battery always holds 10 films. Now let's look at the handle. The handle here is the one that I had there, the other one was solid here, there was a solid hole, and there was a small hole, and so it was the same, so let's see, in my opinion, here on one side there are filters. I already took it apart,

I looked, they were also in the handle, you could just pull it off like this and get the filters one and the second filter, we have yellow and neutral gray, so yellow we have a multiplicity of 1.7, almost two stops And this one is neutral gray has four oh two Stop here, one stop almost And here we have two stops, let's say you looked at the exposure meter, it shows you the aperture 16 When you screw it in, it means two stops 11 and in So on movie cameras you can already set the aperture in if the weather is bright Because when it is soro, of course, this filter must be used Because here the aperture is as closed as possible, this is 11 and if the weather is sunny, let's say we have film if take n from modern 100 ISO, then let's calculate it like this, it means 1/40 with an aperture of 8, something like this, this is sunny weather, so you get three stops, this is at 8 22, here you have exactly two stops, 22 and 16. You can block it with a filter and set the aperture to 11, not at 8, but at 11, then you can shoot in bright sunshine with this filter, since here the shutter speed is 1/40 this must be kept in mind Everything if you shoot in black and white, if it’s already bright on the beach and the sun is bright, you can also add almost one more stop 1.7, you can add it and you’ll get it. Here’s a pie, such a sandwich. So here we have 10mm, which is approximately multiplied by 6-6.5, something like this for 35 mm film, about

a little more than 60mm, so you can screw it in and your clouds will look beautiful with this with a yellow filter and Gray, you have it and cover it at 11 and you can shoot. It’s true that the scale is made interestingly, what is there, that is, it does not correspond a little, that is, 11 here, but like this it buries more and at the same time at 2.8, too, 2.8 there, too, it is slightly covered, as if 2.0. Incorrect , but although I was shooting there for film, everything seemed to fall in And there was no exposure meter, they shot it by eye, you know I just told you something like this: there were 50 units of film, or 45, let’s say, like this one, and with this one, from this As they say, they jumped because 45 was already possible to shoot and without a filter, I always shot without a filter, the film could withstand everything, it’s possible that there is an extreme position 16 I don’t know, it’s hard to say, you need some kind of measuring instruments for this, so uh, in my opinion, I told you everything here The handle is here There is a place and on the other side it’s possible and on the other side on the other side it’s also possible some additional filters, perhaps, if Then perhaps they were sold and it was possible to add some green ones there, or the multiplicity of yellow more red, maybe you also know how Well, that is, there was an opportunity to add on this side, on this left side, there is also room for two more filters, so the handle is screwed in, and so it works, our choke is screwed in here, either here or in the place where we screwed the handle in, as I often did, because with a handle you can’t always put it in your pocket, but it so small, in principle, you could put it in your pocket and I just screw it in here, I left the handle, so I left it like that, it works like that, it’s blocked, and so it’s frame-by-frame again, that is, the fuse is probably that’s how I understand it the shooting is all like this Well, friends, in principle, I can’t say anything more about it, the only thing is that I’ll still shoot something with this film and And I’ll tell you whether there are any frames here or not, of course, these upper layers are now illuminated, but already as they are, I ’ll test it. Well, at one of the stages of development, I cut off a piece from that film, nothing happened, you see. That is, it was just overexposed, apparently it was played back and forth in the camera

tel and all that, depending on how it works or doesn’t work, and I’ll do some other test later, like with the working film, not with fresh but with working film, I’ll load some delay, I’ll see what the result will be Well, I don’t know the habit, I’ll press first, how the top closes in this way LEKO Zaka works, this is our third model, let’s load it in place , yes, here the grab is here, as I say Each camera has its own handwriting, it’s a little hard sometimes Well, there is some some models can be recognized, such as ema, for example, there is a kind of crescent near the perforation, everything is here, everything is ok in the engagement and we close the lid, the designation is 5 m, as it were. There are 5 m left, but it will take us half a meter to drive Svetka away and we can finish filming since most likely there are 50 units here, I will shoot it like 16 probably and let’s see what we can do, whether that film may have been used already, you know how no one knows what what happened before me too, I bought one movie camera Well, I understood I showed it there But there’s nothing at all like this, you can carry it on your hand, it also fits comfortably in your hand, you can take it with your hand like that and go and shoot it’s not like that and don’t forget to unscrew the cap of course So, at the end, I’ll definitely send you the instructions, you’ll get acquainted with these instructions, you’ll have the opportunity to analyze whether it’s necessary or not necessary to buy such a movie camera now I’ll look at maybe something new here I’ll find out Yeah, let’s do this again here, uh, from one and a half mtra Well, in principle, this is the lens I shot with it. Well, closer than one and a half meters there is no point. Although I shot closer, there were frames closer and if I find them, I will also take them off and it was a little blurry, well, very close, that means with an aperture of 2.8 from 1.5 m to infinity, I need to adjust a little bit, I already cleaned it and there it is necessary frame-by-frame Although I don’t need frame-by-frame And that’s how it works I checked somewhere around 16 maybe even 17 frames per second

2025-03-23 19:35

Show Video

Other news

Intel Vision 2025: Intel Products Update (Highlights) 2025-04-06 14:46
Primitive Technology: Re-smelting previously made iron 2025-04-04 20:04
Drum Tech POV | Adelaide, South Australia 2025-04-05 09:07